Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9452198
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
Information Name: | Flame retardant PA66 HiFill PA6 / 6 GF13 X BK |
Published: | 2013-05-02 |
Validity: | 100000 |
Specifications: | 25 kg / bag |
Quantity: | 100000.00 |
Price Description: | |
Detailed Product Description: | Flame retardant PA66 HiFill PA6 / 6 GF13 X the BK injection molding process conditions drying: If the processing of the material is sealed, then there is no need to dry. However, if the storage container is opened, it is recommended in 85 ° C hot air drying. If the humidity is greater than 0.2%, also need to conduct 105 ° C, dried under vacuum for 12 hours. Melting temperature: 260 ~ 290 ° C. Additives for glass products 275 to 280 ° C. Melting temperature higher than 300 ° C should be avoided. Mold temperature: of recommendations 80 ° C. The mold temperature will affect the degree of crystallinity, degree of crystallinity will affect the product's physical characteristics. For thin-walled plastic parts, use less than 40 ° C mold temperature, the degree of crystallinity of the plastic parts over time changes in order to maintain the stability of the plastic parts of the geometry, the need for annealing. Injection pressure: usually in the 750 to 1250bar, depending on material and product design. Injection speed: High-speed (for enhanced material should be slightly lower). Runners and Gates: PA66 solidification time is very short, so the gate is very important. Gate aperture not less than 0.5 * t (where t is the thickness of plastic parts). If you use the hot runner, gate size should be higher than the normal flow is small, because the runner can help prevent premature solidification of materials. If the minimum diameter of the submerged gate, the gate should be 0.75mm. PA66 HiFill PA6 / 6 GF/M40 HS L BK TP Composites, Inc. PA66 HiFill PA6 / 6 GF/M40 HS L NAT TP Composites, Inc. PA66 HiFill PA6 / 6 GF/M40 HS UV BK TP Composites, Inc. PA66 HiFill PA6 / 6 GF/M40 IG BK TP Composites, Inc. PA66 HiFill PA6 / 6 GF/M40 ML2 GY TP Composites, Inc. PA66 HiFill PA6 / 6 GF10 IM L BK TP Composites, Inc. PA66 HiFill PA6 / 6 GF10 L BK TP Composites, Inc. PA66 HiFill PA6 / 6 GF10 L TP Composites, Inc. PA66 HiFill PA6 / 6 GF10 TL10 BK TP Composites, Inc. PA66 HiFill PA6 / 6 GF12 TL20 TP Composites, Inc. PA66 HiFill PA6 / 6 GF13 HS L BK TP Composites, Inc. PA66 HiFill PA6 / 6 GF13 L TP Composites, Inc. PA66 HiFill PA6 / 6 GF13 L YAG TP Composites, Inc. PA66 HiFill PA6 / 6 GF13 TL10 TP Composites, Inc. PA66 HiFill PA6 / 6 GF13 X BK TP Composites, Inc.. |
Admin>>>
You are the 25647 visitor
Copyright © GuangDong ICP No. 10089450, Dongguan Rui Plastic Engineering Plastics Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 25647 visitor
Copyright © GuangDong ICP No. 10089450, Dongguan Rui Plastic Engineering Plastics Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility