Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9452198
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
Information Name: | Supply PA6 HiFill PA6 GF30 LX MT |
Published: | 2013-05-04 |
Validity: | 10000 |
Specifications: | 25 kg / bag |
Quantity: | 100000.00 |
Price Description: | |
Detailed Product Description: | Supply PA6 HiFill PA6 GF30 LX MT process drying: Since PA6 is easy to absorb moisture, so dry before processing with particular attention to, if the material is packed in waterproof material supply, the container should be kept closed. If the humidity is greater than 0.2%, and dried for 16 hours in a hot air of 80 ° C or above is recommended. If the material has been exposed to air for more than eight hours, recommended temperature of 105 ° C, 8 hours of vacuum drying. Melting temperature: 230-280 ℃, the enhanced varieties of 250-280 ℃. Mold temperature: 80-90 ° C. Mold temperature is significantly affect the degree of crystallinity, the degree of crystallinity affect the mechanical properties of plastic parts. The degree of crystallinity is very important for the structural components, it is recommended mold temperature of 80-90 ° C. For thin-walled the process long plastic parts also recommend the application of a higher mold temperature. Increase mold temperature can improve the strength and stiffness of the plastic parts, but lower toughness. If the wall thickness is greater than 3mm, recommend the use of low temperature 20-40 ℃ mold. For glass fiber reinforced materials, the mold temperature should be greater than 80 ° C. Injection pressure: Generally between 750-1250bar (depending on material and product design) Injection speed: High-speed (reinforcing material is slightly lower) Runners and Gates: For PA6 the solidification time is very short, so the gate is important. Gate aperture not less than 0.5 * T (where T is the thickness of the plastic parts). If you use the hot runner, gate size should be higher than the normal flow is small, because the runner can help prevent premature solidification of materials. If the minimum diameter of the submerged gate, the gate should be 0.75mm. PA6 HiFill PA6 GF20 L UV TP Composites, Inc. PA6 HiFill PA6 GF20 L TP Composites, Inc. PA6 HiFill PA6 GF20 RM BK TP Composites, Inc. PA6 HiFill PA6 GF25 L BK TP Composites, Inc. PA6 HiFill PA6 GF30 HF L BK TP Composites, Inc. PA6 HiFill PA6 GF30 HS BK TP Composites, Inc. PA6 HiFill PA6 GF30 HS L BK TP Composites, Inc. PA6 HiFill PA6 GF30 HS UV TP Composites, Inc. PA6 HiFill PA6 GF30 L BK TP Composites, Inc. PA6 HiFill PA6 GF30 LN BK TP Composites, Inc. PA6 HiFill PA6 GF30 L UV BK TP Composites, Inc. PA6 HiFill PA6 GF30 L UV TP Composites, Inc. PA6 HiFill PA6 GF30 LX MT TP Composites, Inc. |
Admin>>>
You are the 25647 visitor
Copyright © GuangDong ICP No. 10089450, Dongguan Rui Plastic Engineering Plastics Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 25647 visitor
Copyright © GuangDong ICP No. 10089450, Dongguan Rui Plastic Engineering Plastics Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility